Hızlı PVC Kapı
High Speed PVC Door
They are silent and fast doors that provide an aesthetic appearance. It can be used in any structure with heavy entrance-exit traffic. Thanks to the full-length transparent window application, it allows the other side of the door to be seen. It can be used as interior doors in industrial areas, indoor transitions. Its rapid opening and bleeding minimizes heat and time loss. Safety photocell is applied as standard. Any access control system can be easily connected.
Rapid Heat Insulated Rolled PVC Door
A thermal insulation board is placed between the double layer tarpaulin. In this way, the door provides thermal insulation between environments of 20-25 degrees. Safety photocell is applied as standard. Any access control system can be easily connected. It prevents loss of time and energy, provides gas and dust insulation between work areas, allows the protection of ambient heat. It is mainly preferred in enterprises where vehicles such as forklifts, pallet trucks, hand trolleys work intensively. It is used as an auxiliary door in cold storages, loading doors and areas that need thermal insulation.
Fast Folding Type PVC Door
It is preferred outdoors due to its greater wind resistance. It can be made up to 6x6 meters. Thanks to the intermediate bars used, it can withstand winds up to 60-70 km/h. Thanks to its windowed structure, the other side of the door can be easily seen. Safety photocell is applied as standard. Any access control system can be easily connected.
In all three doors, there is the possibility of manual use from the motor in case of power cuts. It can be integrated into existing security systems. There are multiple on/off options such as button, radar, photocell, rope opening, magnetic field detector, remote control.
Double-Deck Folding Type Doors
It can be manufactured up to 20x30 meters high. Rolling type doors are used indoors. Shipyard doors, aircraft hangar doors, train hangar doors, truck garage doors, port doors and factory logistics shipping doors, shipping area warehouse door, gross market warehouse door, sterile area warehouse door etc.
Magnetic brake motor
Operating Voltage AC 400 V
Reducer is used according to the size of the door
2 yarn knit belts are used for lifting
Mode of Operation: The drum, which is coupled to the motor, is opened upwards by winding the belts. Comfortable, quiet and safe operation is ensured with the help of plastic rollers in the side guides.
Working Speed 10 -15 m/min
Wind Resistance 120 km/h
Control Unit Special design protection class IP 65 plastic case panel.
Operation is Button controlled (Open - Emergency Stop - Close) and Manual / Automatic selection switch
Side Guides: Specially designed aluminum profiles are used. It is designed to increase wind resistance and minimize air circulation.
Upper Carrier Column is produced from box profile. Changes are made according to the dimensions of the door. It is specially produced to protect and hide the working mechanism of the door.
Inner Carcass Special Design Aluminum profiles are designed to increase wind resistance.
Canvas SIO-LİNE brand 1100 Denier double-sided polyester coated, total weight 900gr/m², working temperature - 35 + 70 degrees, breaking strength 800/750 N, tensile strength 4000/4000 N/5 cm, adhesion force 100 N/5 It is produced from tarpaulin.
Tarpaulin Installation Special aluminum lath profiles are fixed to the profile on the inner carcass by screwing the canvas at 150mm intervals.
Metal Parts Color is painted in the desired Ral color.
Side Sealing: As a result of the contact of the specially reinforced canvas attached to both sides of the PVC tarpaulin with the guide surface, the sealing is minimized. Thus, the wear of the original canvas is prevented.
Bottom Sealing: As a result of contact with the special rubber floor mounted on the lower carrier scissors, the sealing is minimized.
Paint Metal parts are painted in the desired RAL color with primer and topcoat paint.